16mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4160-100-16-R1.0 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 16 |
| ØD (Shaft Dia.) | 16 |
| l (Flute Length) | 30 |
| L (Overall Length) | 100 |
| r (Radius) | 1.0 |
17.5mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)
£25.70 exc. VATThe Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.
- These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
- Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
- TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
- General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
- Split point for higher performance drilling
- Jobber length 5xD
- The most economic coated drill in our range
17mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)
£22.80 exc. VATThe Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.
- These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
- Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
- TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
- General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
- Split point for higher performance drilling
- Jobber length 5xD
- The most economic coated drill in our range
18.5mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)
£28.80 exc. VATThe Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.
- These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
- Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
- TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
- General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
- Split point for higher performance drilling
- Jobber length 5xD
- The most economic coated drill in our range
18mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2180-100-18 (Sangeo)
The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD Coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Ball nosed with short flutes.
- Designed for milling of radius bottom slots, fillets and special contours
| ØD (Cutting Dia.) | 18 |
| ØD (Shaft Dia.) | 18 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | – |
18mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3180-100-18 Series (Ageo)
The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide, 45 HRC
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
18mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3180-100-18 Series (Sangeo)
The Sangeo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
| Operation | General milling for aluminium and brass |
| ØD (Cutting Dia.) | 18 |
| ØD (Shaft Dia.) | 18 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | – |
18mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3180-150-18 Long Series (Sangeo)
The Sangeo DGA Long (150mm Long) series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
| Operation | General milling for aluminium and brass |
| ØD (Cutting Dia.) | 18 |
| ØD (Shaft Dia.) | 18 |
| l (Flute Length) | |
| L (Overall Length) | 150 |
| r (Radius) | – |
18mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4180-100-18 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 18 |
| ØD (Shaft Dia.) | 18 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | – |
18mm Gold-P TiN Coated Eco Jobber Drill – DLD (Sangeo)
£25.70 exc. VATThe Sangeo DLD series eco Gold-P jobber drills offer great value for economical general drilling applications.
- These TiN coated drills reduce cost and increase tool life compared to standard uncoated HSS drills.
- Ideal for general purpose drilling of Steel, Stainless Steel, Titanium and Aluminium. Diameters range from 1-25mm.
- TiN Coating on working area reduces cost and increases tool life compared to standard uncoated HSS drills
- General purpose drill for Steel, Stainless Steel, Titanium and Aluminium
- Split point for higher performance drilling
- Jobber length 5xD
- The most economic coated drill in our range
18mm x 0.5mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4180-100-18-R0.5 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 12 |
| ØD (Shaft Dia.) | 12 |
| l (Flute Length) | 30 |
| L (Overall Length) | 75 |
| r (Radius) | 1.0 |
18mm x 1.00mm 4 Flute Coated Carbide Corner Radius Standard Length End Mill – DXC4180-100-18-R1.0 (Sangeo)
The Sangeo DXC series Coated Carbide milling cutters have 4 flutes and come with a plain shank. These corner radius end mills are available in diameters ranging from 2mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Designed for milling of radius bottom slots, fillets and special contours.
| ØD (Cutting Dia.) | 18 |
| ØD (Shaft Dia.) | 18 |
| l (Flute Length) | 30 |
| L (Overall Length) | 100 |
| r (Radius) | 1.0 |