1mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3010-050-04 Series (Sangeo)
The Sangeo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 4mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
| Operation | General milling for aluminium and brass |
| ØD (Cutting Dia.) | 1 |
| ØD (Shaft Dia.) | 4 |
| l (Flute Length) | 3 |
| L (Overall Length) | 50 |
| r (Radius) | – |
1mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3010-050-06 Series (Sangeo)
The Sangeo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 6mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
| Operation | General milling for aluminium and brass |
| ØD (Cutting Dia.) | 1 |
| ØD (Shaft Dia.) | 6 |
| l (Flute Length) | 3 |
| L (Overall Length) | 50 |
| r (Radius) | – |
1mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4010-050-04 (Sangeo)
The Sangeo DXF series has 4 flutes and a plain shank. These end mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality micrograin carbide.
- Exclusive Sangeo PVD-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Available on plain shanks.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
| ØD (Cutting Dia.) | 1 |
| ØD (Shaft Dia.) | 4 |
| l (Flute Length) | 3 |
| L (Overall Length) | 50 |
| r (Radius) | – |
2.5mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2025-050-04 (Sangeo)
The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD Coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Ball nosed with short flutes.
- Designed for milling of radius bottom slots, fillets and special contours
| ØD (Cutting Dia.) | 2.5 |
| ØD (Shaft Dia.) | 4 |
| l (Flute Length) | 6 |
| L (Overall Length) | 50 |
| r (Radius) | – |
2.5mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3020-050-04 Series (Ageo)
The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide, 45 HRC
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
20mm 2 Flute Coated Carbide Ball Nose Slot Drill – DXB2200-100-20 (Sangeo)
The DXB series PVD Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
The Sangeo DXB series Coated Carbide milling cutters have a ball nose end profile with 2 flutes. These slot drills have a plain shank and are available in diameters ranging from 1mm-20mm. These are ideal for general machining of steels up to HRc55, stainless steel, cast iron, copper and aluminium.
- High quality micrograin carbide.
- PVD Coating with high heat and wear resistance across a wide range of metals.
- Dry cutting on steels can increase tool life up to 50%
- Consistent and reliable performance in general machining conditions.
- Ball nosed with short flutes.
- Designed for milling of radius bottom slots, fillets and special contours
| ØD (Cutting Dia.) | 20 |
| ØD (Shaft Dia.) | 20 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | – |
20mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3200-100-20 Series (Ageo)
The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide, 45 HRC
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
20mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3200-100-20 Series (Sangeo)
The Sangeo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
| Operation | General milling for aluminium and brass |
| ØD (Cutting Dia.) | 20 |
| ØD (Shaft Dia.) | 20 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | – |
20mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3200-150-20 Long Series (Ageo)
The Ageo DGA series uncoated carbide 45 Degree helix cutter has 3 flutes and a 20mm plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide, 45 HRC
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
20mm 3 Flute 45 Degree Helix Uncoated Solid Carbide Aluminium Geometry Slot Drill – DGA3200-150-20 Long Series (Sangeo)
The Sangeo DGA Long (150mm Long) series uncoated carbide 45 Degree helix cutter has 3 flutes and a plain shank. These slot drills range in diameter from 1mm-20mm. These polished high helix milling cutters are ideal for general aluminium and plastic machining.
- Micrograin carbide
- Uncoated polished solid carbide
- Polished high helix milling cutter for general aluminium and plastic machining
- 45° Helix
- Long length
- 3 Flute
- Plain shank
| Operation | General milling for aluminium and brass |
| ØD (Cutting Dia.) | 20 |
| ØD (Shaft Dia.) | 20 |
| l (Flute Length) | 75 |
| L (Overall Length) | 150 |
| r (Radius) | – |
20mm 3 Flute DLC Coated DXU U-Slot Mill Carbide End Mill – DXU3200-100-20 (Ageo)
The Ageo DXA series DLC coated carbide helix cutter has 3 flutes and a 20mm plain shank. These slot End Mills range in diameter from 1mm-20mm. They are ideal for the general machining of steels up to HRc55, Stainless Steel and Cast Iron.
- High quality Micrograin carbide, 55 HRC
- Exclusive Ageo DLC-Coating offers higher performance machining compared to standard TiALN coatings.
- Wide range of geometries including various flute styles and ball nosed options.
- Suitable for wet or dry machining. Dry cutting on steels can increase tool life up to 50%.
- Consistent and reliable performance in general machining conditions on CNC machines.
- DLC Coated solid carbide
- Long length
- 3 Flute
- Plain shank
20mm 4 Flute PVD Coated DXF Mill Carbide End Mill – DXF4200-100-20 (Sangeo)
The DXF series PVD Coated Carbide milling cutters have 4 flutes and come with a plain shank. These are ideal for high cutting on hardened (extreme) steel up to 55HrC. These endmills are available in diameters ranging from 1mm-20mm.
| ØD (Cutting Dia.) | 20 |
| ØD (Shaft Dia.) | 20 |
| l (Flute Length) | 45 |
| L (Overall Length) | 100 |
| r (Radius) | – |